Accreditation Code Category

Power Supply

Accreditation Codes

  • AS/NZS 61347.1

    Lamp controlgear - General requirements

  • AS/NZS 61347.2.10

    Electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)

  • AS/NZS 61347.2.11

    Miscellaneous electronic circuits used with luminaires

  • AS/NZS 61347.2.2

    d.c.or a.c. supplied electronic step-down convertors for filament lamps

  • AS/NZS 61347.2.3

    a.c. supplied electronic ballasts for fluorescent lamps

  • AS/NZS 61347.2.4

    d.c. supplied electronic ballasts for general lighting

  • AS/NZS 61347.2.5

    d.c. supplied electronic ballasts for public transport

  • AS/NZS 61347.2.8

    Ballasts for fluorescent lamps

  • AS/NZS 61347.2.9

    Ballasts for discharge lamps (excluding fluorescent lamps)

  • AS/NZS 61558.1

    Part 1: General requirements

  • AS/NZS 61558.2.15

    isolating transformers for the supply of medical locations

  • AS/NZS 61558.2.16

    Switch mode power supply units and transformers for swtich mode power supply units

  • AS/NZS 61558.2.17

    Transformers for switch mode power supplies

  • AS/NZS 61558.2.4

    Isolating transformers for general use

  • AS/NZS 61558.2.5

    Shaver transformers

  • AS/NZS 61558.2.6

    Safety isolating transformers for general use

  • AS/NZS 61558.2.7

    Transformers for toys

  • AS/NZS 61558.2.8

    Bell and chime transformers

  • AS/NZS 61558.2.9

    Transformers for class III handlamps for tungsten filament lamps

  • IEC 61347-1

    Lamp controlgear - General requirements

  • IEC 61347-2-10

    Electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)

  • IEC 61347-2-11

    Miscellaneous electronic circuits used with luminaires

  • IEC 61347-2-12

    d.c. or a.c. or a.c. supplied electronic controlgear for discharge lamps (excluding fluorescent lamps)

  • IEC 61347-2-13

    Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

  • IEC 61347-2-2

    d.c.or a.c. supplied electronic step-down convertors for filament lamps

  • IEC 61347-2-3

    a.c. supplied electronic ballasts for fluorescent lamps

  • IEC 61347-2-4

    d.c. supplied electronic ballasts for general lighting

  • IEC 61347-2-5

    d.c. supplied electronic ballasts for public transport

  • IEC 61347-2-6

    d.c supplied electronic ballasts for aircraft lighting

  • IEC 61347-2-7

    Particular requirements for d.c. supplied electronic ballasts for emergency lighting

  • IEC 61347-2-8

    Ballasts for fluorescent lamps

  • IEC 61347-2-9

    Ballasts for discharge lamps (excluding fluorescent lamps)

  • IEC 61558-1

    Safety of power transformers, power supplies, reactors and similar products - Part 1: General Requirements and Tests

  • IEC 61558-2-12

    Particular requirements for constant voltage transformers

  • IEC 61558-2-13

    Auto transformers and power supply units incorporating auto transformers

  • IEC 61558-2-15

    isolating transformers for the supply of medical locations

  • IEC 61558-2-16

    Switch mode power supply units and transformers for switch mode power supply units

  • IEC 61558-2-2

    Control transformers and power supplies incorporating control transformers

  • IEC 61558-2-20

    Particular requirements for small reactors

  • IEC 61558-2-4

    Isolating transformers for general use

  • IEC 61558-2-5

    Shaver transformers

  • IEC 61558-2-6

    Safety isolating transformers for general use

  • IEC 61558-2-7

    Transformers for toys

  • IEC 61558-2-8

    Bell and chime transformers

  • IEC 61558-2-9

    Transformers for class III handlamps for tungsten filament lamps

Accredited Laboratories